On July 1, 2023, the SAN-U Optronics Industrial Park project located in Tongxianggao New City was successfully capped. SAN-U Optronic expanded its investment in Xiamen Torch High tech Zone and built a new SAN-U Optronic Industrial Park, marking a milestone in project construction.         The total construction area of the SAN-U Optronics Industrial Park project is approximately 48000 square meters, including two factory buildings and one office complex building. The project will commence at the end of 2022, with a planned construction period of 24 months. The project plans to build 18 production lines. In addition to integrating existing production lines, it will also build a design and development center for 5G carrier network equipment optoelectronic devices, SiC (silicon carbide) series products above 1200V, sensing laser light sources, MEMS (micro electromechanical system) chip sealing and testing, as well as supporting infrastructure. This is of great significance for improving the overall layout of the semiconductor industry chain in our city.         We will implement and transform the early research and development achievements and ongoing projects through key laboratories, pilot production lines, and fully intelligent production lines in the industrial park. According to Li Ling, Chairman of SAN-U Optronics, the new industrial park is beneficial for the company to integrate and upgrade its production layout, expand production capacity, and improve production efficiency. Among them, the intelligent production line of the industrial park will mass produce a series of new products, such as MEMS sensors for methane gas monitoring, semiconductor lasers for unmanned driving, drones, and other fields.         It is worth noting that the SAN-U Optronics Industrial Park project only took 6 months from its start to its completion. Chairman Li Ling said that behind this, it is inseparable from the refined services of the Torch High tech Zone. From early project planning to bidding and construction management, the construction service team of Torch High tech Zone assisted us in promoting related work, and a series of services made us feel worry and effort free.         Chairman Li Ling stated that SAN-U Optronics plans to gradually launch production line relocation work starting from the second quarter of next year. The company will seize the opportunity for cross island development, actively integrate into the city's high-tech industry layout, and strive to become the main supplier of sensors in China. The SAN-U Optronics Industrial Park project is located in the Tong'an area of Tongxiang High tech New City. The project is planned to invest over 250 million yuan and is expected to achieve an annual output value of over 2 billion yuan after reaching its capacity. The total construction area of the project is approximately 48000 square meters, mainly consisting of two factory buildings and one office complex building. The industrial park will build a production workshop that integrates its existing production capacity of optoelectronic devices and optoelectronic components applied in the fields of data transmission and communication, and establish a design and development center and supporting infrastructure for 5G carrier network equipment optoelectronic devices, SiC series products above 1200V, sensing laser light sources, MEMS chip sealing and testing, and other production lines.

        From August 13th to August 17th, the 4th Optoelectronic Integrated Chip Strengthening Conference was successfully held, with over 80 universities, more than 50 research institutes, and more than 130 enterprises attending. Over a thousand academicians, leading experts in the industry, and others gathered in Xiamen to discuss the development and application of optoelectronic integrated chips through 32 special seminars. The conference focuses on the integration technology and application of optoelectronics, the conversion of new and old functions in the industry, and new opportunities for sustainable development. It is the commanding heights of future industry competition and has important strategic significance. This event is organized by Xiamen SAN-U Optronics Co., Ltd., and Dr. Li Ling, the chairman of SAN-U Optronics, serves as the executive chairman of this event.         The experts of the SAN-U Optronics Ocean Laser Project gave a wonderful report at the LiDAR special meeting, and the research results were the first in China and received praise from experts and scholars present.         Jiang Tian, Deputy Chief Engineer of Sanyou R&D, presented a report on "Packaging and Industrialization of MEMS Biochips" at the Youth Entrepreneurs Exchange Meeting at the Strong Building Conference, reviewing the company's development path and innovative achievements in the industrialization of biochips. The report also points out that after the completion of the New Sanyou Industrial Park, the company will vigorously expand its business areas of data communication products, sensor applications, and SiC power electronics modules, enabling the company to innovate and maintain high-speed growth.         During the meeting, more than 30 industry and university experts from the Institute of Semiconductors of the Chinese Academy of Sciences and Tsinghua University visited Xiamen SAN-U Optronics Co., Ltd. for visits and exchanges. Multiple experts fully affirmed the construction achievements of the SAN-U Optronics Chip Center and actively conducted project cooperation negotiations         This conference lasted until August 17th. In addition to the conference report and special seminar, the conference also held rich and colorful exchange activities such as round table discussions, expert lectures, youth entrepreneur exchange meetings, training, product displays, and excellent paper selection, presenting the latest technological trends and development trends at home and abroad, and building a face-to-face communication and cooperation platform for technology, projects, and talents.

        As one of the largest and most influential laser and optoelectronic technology exhibitions in Europe, the LASER World of Photonics MUNICH in Munich, Germany, opened on June 27th at the Munich International Expo Center.         Xiamen SAN-U Optronics Co., Ltd. participated in this event with optical communication products such as LiDAR products (already mass-produced 1550nm in car LiDAR and 905nm industrial robot ranging LiDAR), photoelectric gas sensing products (mass-produced 1653.7nm methane gas detection and oxygen, carbon dioxide, etc. under development), and coaxial 100Gbps EML device components, At the same time, we also introduced and showcased the automated production line of optoelectronic products built by SAN-U Optronics over the past 20 years, which has attracted widespread attention and discussion from attendees.         During the exhibition, SAN-U attracted more than 55 customers from 22 countries and regions for business negotiations. SAN-U Optronics produced and developed laser devices -905nm/1550nm LD (LiDar) and sensing products - gas sensors (methane, oxygen, carbon dioxide, and carbon monoxide sensors), narrow linewidth lasers, etc., which received widespread attention, especially gas sensors that received recognition and praise from many overseas customers.         SAN-U Optronics is seizing the development opportunities of the laser industry, based in China, expanding globally, actively expanding its domestic and international markets, and covering multiple regions both domestically and internationally with its marketing service network.         This exhibition is the focus of SAN-U Optronics to accelerate its global layout and explore overseas markets. In the future, SAN-U Optronics will continue to participate in more international industry activities, create high-quality, high-performance, and highly reliable products for global customers, lead the development of industry technology, and contribute more wisdom and strength to the development of the laser sensing industry.

        ICC News: On September 9-11, CIOE 2020 will be held at the Shenzhen International Convention and Exhibition Center. Xiamen SAN-U Optronics Co., Ltd. (hereinafter referred to as SAN-U Optronics), a pioneer in optoelectronic device research and development, will grandly showcase its 25G high-speed optoelectronic device series products, with booth number 8D21. We welcome colleagues from the optical communication industry to visit the booth for exchange and cooperation.         As the commercial use of 5G enters the stage of large-scale construction, the market size of 5G base stations in China is expected to reach 100 billion by 2022, and the number of 5G base stations will reach one million. The demand for 5G optical modules has begun, and a large number of 25G front-end optical devices and modules are being released. At the same time, the rapidly developing cloud computing services and their infrastructure are expected to continue to increase demand for logarithmic optical modules.         Taking advantage of the demand in the 5G optical communication market, SAN-U Optronics will focus on showcasing its 25G high-speed optoelectronic device series products at this CIOE Optical Expo.         SAN-U Optronics was established in January 2001 and is a high-tech enterprise that develops and mass-produces high-speed semiconductor lasers/detectors, optical components, and optical modules. Its products have been widely used in important fields such as cloud computing, optical communication, fiber to home, and sensing detection, with a leading market share in the industry. The company has an advanced automated production line for device level products and a complete set of solutions in the industry. In terms of scale manufacturing capabilities, the company has advanced automated production lines for optical devices in China and the most competitive lean production base for intelligent terminals in East China. At present, our various products have successfully entered the global supply chain of cloud computing data centers, fiber to home, and 4G/5G mobile communication international operators. With the rise of the construction boom of 5G base stations and data centers, market demand continues to grow. The 25G series products developed by our company for 5G wireless communication will become a new growth point for the company's performance.

        On March 5, 2019, the 44th American Fiber Optic Communication Expo and Seminar (OFC) was held at the San Diego Convention and Exhibition Center in the United States, with SAN-U Optronics booth number # 5113. Our company has grandly showcased and developed a hot series of products for applications such as 5G carrier optical modules, 100G and above big data optical interconnection products, 10G fiber to home devices, IoT sensors, and biomedical lasers.         At the exhibition site, our company gained a lot and received customers and suppliers from countries such as the United States, France, Japan, South Korea, Germany, Italy, etc. Domestic and foreign customers have given high attention to our company's key products such as 25G APD, 25G DFB, 40G/100G COB OEM, optical engine, 1550nm/850nm LD, Turnable LD, etc. At the exhibition site, many customers clearly defined their needs and signed cooperation agreements.